UNDER FLOOR HEATING MATS

Application	Output (W / m2)			Application	Output (W / m2)
	Max.	Normal			Max.	Normal
Living Room	100	70-100		Kindergarden	100	40-60
Kitchen	100	70-100		Office	100	50-70
Sleeping Room	100	70-100		Warehouse	100	80-100
Cellar	100	70-100		Shop	100	80-100
Bath	100	120-150		Wooden Floor*	80	50-70
WC	100	120-150		Freezer Floor*		10-15
Entrance Hall	100	80-100		Storage Heating	250	180-250
Basic Heating		40-60		Snow Melting	350	300
				* Max - 10 W / m

Single Wire Construction :- In this single wire construction cable is used hence there are two cold tails and the second cold tail had to be brought back at the starting point to finish the laying.

Twin Wire Construction :- In this the win wire construction cable is used having only one cold tail for connection hence this system is the most convenient to install and also have negligible EMF.

Single wire construction		Twin wire construction

Heating mats are Fiberglass mats on which heating cable is fixed using self adhesive double sided tape to get predetermined spacing and power density. This makes the installation of the heating system much faster and easier as now the installer does not have to worry about laying the cable with correct spacing. You just have to roll the mat over the floor and attach it to the floor using the double sided tape on the mat and you will get the desired watt density. Hence lot of installation time is saved and chances of error are minimized by using underfloor heating mat. The mats are manufactured in two configurations

These mats are fast gaining popularity as a product of choice specially in DIY sector as it reduces labour cost and installation time drastically as compared to installation of cables directly.

The specifications are given below : -

General :
Cable Type	Single/Twin Conductor with Screen
Rated Voltage	230 V~ AC
Watts per Meter2	120 W/m2 , 160 W/m2
Dimensions (W x L)	0.5m or 1.0 m Wide x 1m to 20m Long
Cold Tail Length	2 x 3m ( single wire) 1X 3mtr( twin wire)
Conductor Insulation	PTFE 265 Deg C
Sheath	PTFE 265 Deg C
Tolerance Ohmic Value	10% or -%5
Mat Construction	Polypropylene Coated Glass Fibre Net